The Indestructible Field Drilling King: Diesel Vertical Bracket Drilling Machine Q&A

Q1: What engineering scenarios is this equipment mainly used for?

A : Widely used for PV drilling in remote areas without grid coverage, power utility pole planting, highway guardrail post drilling, agricultural greenhouse construction, and high-standard deep orchard fertilization. It is especially suitable for high-precision operations with large diameters (up to 400mm) and deep holes (over 1-3 meters) in hard soil and frozen soil environments.

Q2: Does the so-called "vertical bracket" structure really guarantee no hole deviation?

A : Absolutely. This is the core value of the "vertical bracket". The equipment features a triangular/quadrangular guide bracket welded with thickened steel pipes. Before drilling, use the built-in spirit level to level the base; during drilling, the power head presses down vertically along the guide rail. The verticality error is controlled within ±2cm, completely overcoming the "slanted hole" issue caused by uneven force in handheld drills.

Q3: If the drill gets stuck in rocks during operation and causes the bracket to shake violently, what should be done?

A : When jammed by extremely hard rocks, the high torque of the diesel engine transfers to the bracket. For safety, our equipment is equipped with two key designs:1. Overload protection/clutch: When torque exceeds a safe value, the transmission system slips, preventing drill rod breakage or engine damage.2. Reverse backing-out function: The operator can switch to reverse to smoothly back out the drill, clear the obstacle, and continue drilling.

Q4: I mainly drill large-diameter tree pits or pole pits. Is the power of this machine sufficient?

A : Absolutely sufficient. This is not just about machine size, but also bit configuration. Our diesel engine power is enough to drive  400mm large-diameter spiral bits. If encountering very hard clay, simply use a low-speed, slow feed rate. Paired with thickened alloy serrated bits, the machine continuously outputs strong torque to easily complete the drilling.